Preventing Conquering

Players often fail in defending their village because they do not know how to react, or they react too late. With a successful defence, a player can harm the attacker and even prevent the conquering.


Precautions

Spies

Spies or scouts are often underestimated, but they are cheap and can reduce the possibility of conquest very easily. A player looking for a conquer-victim may be put off attacking your village if his attempt to scout it fails as there is a risk his army will get wiped out. Even if the attacker succeeds in scouting your village, with spies, you will know that you have been scouted.


The Wall


This defensive structure increases the defence value of the troops inside the village by up to 81%. With this bonus, even a relatively small army can be devastating.


Walls & Rams


Alliance


A good alliance not only discourages possible attackers with its name but may also provide you with defence in case of an attack. Diplomacy is important!


Alliance


Celebrations


If possible, each village should have a Town Hall level 10 so that you can start big celebrations which influence administrators in your favour. The celebrations will also grant you culture points to help you found another village.


Administration Buildings


It would help if each village has an administration building as these must be destroyed before a village can be conquered. There are 3 types of administration building:


  • Residence
  • Palace
  • Command Center (Huns Only)
Analyse the attacks

There are three types of attack:


  • Raid attacks - This attack is mostly done with fast troops and used to surprise the defender.
  • Fake attacks - Often used in combination with conquering attack to confuse the defender so that he is unable to know which attacks are real.
  • Conquering attacks

Conquering attacks are mostly made in several waves which contain catapults and rams, making them slow.


The speed of your army depends on the slowest unit participating. Rams and even more so catapults are necessary to conquer a village (by destroying the administration building), but they are the slowest units for each tribe. When you see an inbound attack you can check its origin via the rally point and work out what the slowest unit in the attack is. As you need to see an inbound attack as soon as possible after it has been launched, activity is a key factor.


Distance Calculator on Kirilloid


Several waves are signs of conquering but remember that they might be fakes. Also, check the village that has been chosen as a victim. A 300-inhabitant village will not be the target of a conquering in most cases (unless they are a cropper). A high population village or a strategic village like your army camp/training village are likely to be a target.


The conquering waves are formed with a cleaner which will destroy the enemy's defence (including walls in most cases), followed by catapults (to destroy the palace or residence ) and then the administrators (to lower the loyalty). This scheme is most common but does not apply to every conquering. Sometimes they are combined or divided by additional cleaning waves or fakes. Also, the attacker will try to time the attacks so that the conquering will take place in very few seconds to make it so that the defender will be unable to send defence in-between.


Each Tribe has slightly different amounts of loyalty an administrator can lower.


Loyalty Factors


Defence strategies

Defenders have several different ways to react depending on the initial situation. First of all, even if you have lost all hope, using a suitable strategy may harm the attacker, and you will learn how to react better ready for the next time when someone wants to conquer your village(s).


Always keep in mind that the attacker also had to learn how to conquer a village and had to improve his strategy. Every inbound attack is a way for you to improve your defensive skills!


The wall


This strategy involves filling your village with as many defensive troops as possible and hoping that they are enough to crush the attacker's army. Keep in mind that you should use mixed troops because you do not know if you will be fighting infantry or cavalry.


The troops should be in the village before the first attacks arrive. You can even combine armies of different villages and players in one huge defence army which the attacker cannot. It would help if you wrote messages to your alliance and friends to ask for sufficient crop so that the troops will not starve to death before it comes to the fighting.


The Administrative Building Upgrade


You can use an administration building to your advantage to prevent conquest by timing a level to complete after the clearing wave has landed but before the administrators arrive.


The queued building will still complete at the time set for the higher level even if the original building were demolished but would of course only make a level 1 building.

Example

If the clearing wave and catapults landed at 10:00:01 and the administrators at 10:00:02 The building should be queued to complete at 10:00:02 due to the order events are processed


Event Order


The wave splitter


Using this strategy is a bit iffy, especially against well-trained attackers, but it can be done successfully with very few troops. If you are not sure that you can do this, but you want to try it, you should combine it with the wall for your own safety.


In this strategy, the cleaning wave is ignored, and defensive troops will be timed in between this cleaning wave and the catapults. This means that you will lose some resources, perhaps a building and very few troops.


Keep in mind that the attacker might ask his friends to send a second cleaning wave, or he will attack in such a way that the waves will arrive in quick succession so that it will be almost impossible to send defence in-between.


  

The celebration defence


In this strategy, you will defend with big celebrations. They lower the effectiveness of enemy administrators by up to 5% so that the attacker will need to send more of them. If the attacker sends too few of them your villages loyalty will not be lowered enough. This strategy is very, very risky as a cautious attacker will always send enough senators/chiefs/chieftains to outrun a big celebration's effect.


Using a tablet of law


This hero item raises the loyalty in the home town of the hero for 1% for each tablet, to a maximum of 125%, so that the attacker will need to send more senators/chiefs/chieftains. If the attacker sends too few of them, your villages loyalty will not be lowered enough. This strategy is very, very risky as a cautious attacker will always send enough senators/chiefs/chieftains to outrun this effect.


Hero Consumables


The counterattack

Stealing crop


When you see that you have an incoming attack which will arrive in several hours you can try to attack the attacking village to steal valuable crop. If you succeed in either stealing the crop or destroying a granary, one or two of the attacking troops will most likely starve to death before they arrive.


This counterattack can even be started by one of your allies who are nearer to the attacking village so that the starvation will start earlier. This strategy relies on attacker being offline after launching the attacks or not having enough time to defend the village.


Conquering the attacking village


Conquering the attacking village will not only stop the incoming attack but also seriously harm the attacker. His troops and the village will be gone. Unfortunately, this method of stopping an inbound conquering mostly fails due to the lack of time as your troops will need about the same time to reach the attacker as the attacker needs to reach you. However, with the help of nearby allies, this should work.


Re-Conquering & Destroying the offence


With this tactic, you will "allow" the attacker to conquer the village, but immediately afterwards your Off-army will arrive and destroy the remaining troops (the troops accompanying the senator/chief/chieftain obtaining the village will stay there). When this happens, the attacker will not only lose the village but also his precious troops stationed there. Using a senator/chief/chieftain will get the village back into your hands but you should be quick about it as the original attacker may build an administration building


Keep in mind that the attacker might include defence in his final wave, which will defend the village until more defence arrives.


Finally, it is a good idea to build an administration building directly after the conquering to raise loyalty again.


Enemy self-annihilation


This is a variation of the last strategy but can only be accomplished when you have enough time to destroy your own administration building and lower your loyalty to below 20%. After this, you should allow the attacker to capture your village as described before but this time the first of the attacker's senators/chiefs/chieftains will conquer the village and every wave afterwards will crash into the "defenders". After this, you can re-take the village without fearing that the attacker might send another wave. This is a devastating and devilish strategy. Hint: you will lose another (random) building besides the administration building due to the attacker's catapults!


Take advantages of your enemy's mistakes.


In many cases, you will not have to deal with a professional player, and even if you do, no one is perfect. The mistakes of the attacker should be used to your advantage regardless of who attacks! Every chance you get to prevent the conquering is a bonus.


Fake attacks


The following are signs that an attack could be fake:

  • Isolated attack on less important villages (viewpoint of the attacker!) while many waves are attacking only one village.
  • Many different times of arrival of attacks (a time slot of several minutes is enough to know that the attacker is certainly no pro).
  • Regular attacks with the same speed from the same village.

Including allies


If the attacker includes his/her allies, then you can be relatively certain that they will send either an additional cleaning wave or catapults, especially if the attacker is weak. But beware, the ally might have sent just some additional fakes after all!

Uncontrollable circumstances

Sadly technical problems delay or play havoc with your plans from time to time:


Lag and Event Jams


Lag occurs from time to time when the server has too many things to calculate. This slows down the procession of events and may cause Event Jams (request of pages or confirmation of actions) ranging from several seconds or several minutes. This will hamper both, the attacker and the defender, alike and can ruin every plan so that the catapults will arrive before the cleaning wave arrives.


Event Jams


Server failures


Complete server failures are rare but can be devastating in the "wrong" moment. They could make it so that the attacker barely manages to send the catapults and is thereafter unable to do anything at all because a database is unavailable. They could also harm the defender by making him unable to get the defence needed.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.